Waste Tyre Recycling MachineHOME >> Products >> Waste Tyre Recycling Machine >>

Waste Tyre Recycling Machine

Image loading......
Image loading......
Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine Waste Tyre Recycling Machine
Product Description
Application: Waste Tyre Recycling Machine Rubber Powder Plant is a new hot highly profitable green project, which can Crush the waste tire into rubber powder with advantage of environmental protection and energy saving, bright market prospect. (Steel Tyre: 76% rubber powders, 17% steel wire, and 5% or less dust; Nylon Tire: 76% rubber, 11% fiber, 6% steel wire and 5% or less dust)
 
The working process: 
waste tyre -- tyre debeader -- tyre cutting machine -- whole tyre shredder -- big conveyor equipment -- rubber crusher -- big shaking screen -- small conveyor equipment -- magnetic separator -- small shaking screen -- fiber separator -- 5-30 mesh powder -- rubber fine grinder -- 40-120 mesh powder. 
Salient Features
High automation, few operators
Reduce the production price efficiently
Without pollution, stable equipment performance

Tire recycling machine a new hot highly profitable green project, which can convert waste tires/rubber/plastic to treasure (Steel Tyre: 76% rubber powders, 17% steel wire, and 5% or less dust; Nylon Tire: 76% rubber, 11% fiber, 6% steel wire and 5% or less dust)
 
Technical Parameters
No Name model quantity Power
whole tire pre-processing , you will get < 50*50MM rubber crumb
1 Single hook debeader LS-1200 1 11 KW
2 Whole tyre cutter WTC-120 1 5.5 KW
3/4 Whole tyre shredder( with whole tyre conveyor) ZPS900 1 61.5 KW
Rubber powder processing: you will get 3-8 MM rubber powder,at the same time, separate the fiber and steel wire
5 Tyre crusher  XK560 1 75  KW
6 Big conveyor equipment BCL-8 2 2   KW
7 Small conveyor equipment BCL-3 1 1.1  KW
8 Big Magnet separator BMS22 1 2.2  KW
9 Small Magnet separator SMS-1 1 1.1  KW
10 Big Shaking screen  BSS-8 1 7.5  KW
11 Small Shaking screen  SSS-3 1 3   KW
12 Fiber separator  FS110 1 11  KW
13 Fine grinder  XMF420 1 32.4 kw
14 Circle shaking screen DIA600 1 2.2 kw

Structural Features
1.To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely recycled at ambient temperature.
 
2.The input is whole tires,after the processing,steel is completely separated and fiber can be separated up to 99% or above.The finish product is high and competitive in the market.
 
3.Tight construction, small space and simple technique flow.
 
4. Low energy-consuming and good performance-cost ratio
 
5.Hight automatization, fewer labours requirements.
 
6.Reasonable construction,easy operation and low rate of breakdown
 
7.Environmental-protection,no pollution(no waste gas,no waste residue,no polluted water),meeting the environmental requirements of the government

Services Commitment
1. Our engineers can design target machines for you and send the drawing to confirm.
 2. In the process of production, we will take photos and send to customers for you tracking.
3. Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
4. We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
 5. We supply overseas technical support
 6.Test Machine Before Delivery, you only need to connect the wires to the outside the control cabinet. 
 
FAQ 
1. Delivery time of the rubber machines? 
 This is specially designed machine according to your specific requirement.
 From engineer designing to production completion, it needs about 25 to 35 days.
 
2. What does your factory do regarding quality control?
 We pay much more importance to quality control from the very beginning to the end of production.
 Every machine will be fully assembled and carefully tested before shipment.
 
3. What''''''''''''''''''''''''''''''''s the machine quality guarantee? 
 Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
 
4. Are you able to give installation and commissioning overseas? How long time will it take?
 Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
 Small machine usually takes within 2~3 days.
 Big plant usually takes about 30 days.
 
5. How can I trust you to deliver the right machine as I ordered? 
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
 The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you''''''''''''''''''''''''''''''''re the user around us.
 
6. How can we go to your side?  
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport.
We will pick up you at the airport.
 

Online Message

LAST文章:Double screw rubber strainerNEXT文章:NO HAVE